Order online
CYCLONE Taiwan

CYCLONE DIY Kit Motor power @ 180W, 250W, 360W, 500W, 650W, 900W, 1200W

Use the crank remover to remove the nut from the axle.
Use the crank remover to remove the chain wheel and cranks
Use crank remover to remove the chain wheel and cranks
The distance between the rear wheel and the button bracket must be at least 60 mm
Remove the nut from the button bracket
Remove the Axle from the button bracket and replace it with the longer Axle.
Put the motor・s mounting bracket on the bike frame.
Put the motor on the mounting bracket
Put the chain wheel on the freewheel crank then on the Axle.
Add more chain on the original chain link ( approx.4 links)
Tighten the cranks with the crank remover
Put the chain over the motor・s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CCW motor)
Put the chain over the motor・s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CW motor)
Motor throttle on the right hand side
Gear grip on the left hand side
Plug the throttle plug in to the motor side controller plug
Plug in the battery power cord to the motor・s power cord.
Complete